Aller au contenu
Pas de pub non magique pour les membres du Cercle VM. Clique ici pour en savoir plus !

Recommended Posts

Publié le

Have you ever wondered why shaking a soda results in a great explosion when it's opened? What causes a 2-liter bottle of soda to go flat? Is there anything that can be done to keep fizz in a bottle of soda? Get ready to uncover some amazing soda secrets that will change your soda drinking habits.

24-200x.jpg

Materials:

Cans of unopened soda. It's best to practice with clear liquids! Try club soda. IMPORTANT: Do not use any diet soda!

Since the fizz in the soda is actually dissolved carbon dioxide gas, the goal is to keep as much of the gas in the bottle as possible. Soda fizzes when dissolved carbon dioxide gas is released in the form of bubbles. At the bottling plant, carbon dioxide molecules are forced into the soda in an amount that is greater than would ordinarily dissolve under atmospheric conditions. As soon as you open the bottle, most of the excess gas escapes into the room - that's a given! So, it's your job to find a way to keep the remaining gas in the liquid.

Experiment:

Vigorously shake a sealed can of soda.

Invite a dinner guest to immediately open the can! Of course, most sane people will refuse the offer.

With a little science know-how, you'll be able to open the can without spilling a drop. The secret is to use your finger to snap the side of the can. This action dislodges the bubbles attached to the side of the can and they float to the top. When the can is opened, the gas simply escapes. As you will soon discover, tapping the top of the can does nothing.

Results:

Shaking the unopened can of soda causes bubbles of carbon dioxide to line the inside walls of the can. When you open the can, the pressure in the can goes down and the volume of each bubble goes up (Boyle's Law). The quickly expanding bubbles force the liquid that rests above it out of the can

Additional Information:

Most people have learned to tap the top of the can before opening it. Scientifically speaking, THIS DOES NOTHING! However, tapping the side of the can knocks bubbles off the bottom and sides of the can, at which point they rise to the top. The trick is to dislodge the bubbles from the sidewalls and bottom of the can so they can float to the top of the can (because gas is lighter than liquid) and there is only a small amount of liquid blocking their escape when you open the can. Remember, SNAP the SIDE instead of tapping the top.

Pas de pub non magique pour les membres du Cercle VM. Clique ici pour en savoir plus !
Publié le (modifié)

Dans la Vidéo : Tom Mullica's expert impromptu magic (A-1 multimedia), Tom Mullica présente une routine à faire au bar qui utilise ce principe physique pour faire voyager le gaz entre deux canettes (une secouée de laquelle rien ne séchappe et une non secouée donc la boisson jaillit à l'ouverture). Routine très efficace que j'ai eu l'occasion de présenter bien des fois en magie de bar.

Faites l'expérience proposée par Gérard, c'est redoutable et ça met l'ambiance.

Modifié par Thierry Schanen
Publié le

C'est marrant, il y a un épisode de Scrub (série américaine genre "urgence" mais version drôle) où le docteur JD fait la même chose, mais la canette lui explose quand même à la figure...

Publié le
En français, ça donne... "si les magiciens se mettaient un peu aux langues étrangères, qu'est-ce qu'ils pourraient partager comme comme idées !"

Je ne me moque pas !

Certes mon anglais est assez médiocre mais je me débrouille.

Peut-être suis-je un peu chauviniste, aprés tous le premier magicien moderne n'était-il pas francais : Robert Houdin.

Et puis comment fais-tu avec ttes le s viédos et livres en anglais ?

Pour les vidéo de magie, pour moi comme beaucoup d'autres, c'est un peu comme les films de Q. On se concentre plus sur les images que sur le dialogue.

lol

Sinon j'utilise cela

L'imagination est plus importante que le savoir.
Albert Einstein

Rejoins la conversation !

Tu peux publier maintenant et t'enregistrer plus tard. Si tu as un compte, connecte-toi maintenant pour publier avec ton identité.

Invité
Répondre à ce sujet…

×   Vous avez collé du contenu avec mise en forme.   Restaurer la mise en forme

  Only 75 emoji are allowed.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédemment saisis, a été restauré..   Effacer le contenu

×   You cannot paste images directly. Upload or insert images from URL.

  • Pas de pub non magique pour les membres du Cercle VM. Clique ici pour en savoir plus !
  • Messages

    • La suite :  https://www.instagram.com/reel/DaVtwPRxM0L/?igsh=MTFuZnhxZnBxeGNnMw==
    • Bonsoir Jean-Roch. Je vous remercie de m'avoir répondu, et, du coup je vous remercie pour votre aide. Oui vous avez raison Jean-Roch, en effet, çà a un prix. Et dès lors que l'on veux des résultats corrects, il faut mettre le prix. Après avoir cherché un peu sur le net, je crois que je vais opter pour Adobe Firefly. Je l'ai testé un petit peu, les résultats sont vraiment bluffants. Quand j'aurai fini mon travail, je reviendrai sur ce post pour donner mes impressions à la communauté VM. De mémoire, çà coute 150 Euros le mois, avec un nombre de crédits qui semble pas mal. pas top mais pas mal.  J'ai demandé à la conseillère si je pouvais avoir un nombre de crédits illimité sur un mois. Je n'ai pas encore de réponse mais, à mon avis, cette gentille dame me dira non. En tous les cas, je vous remercie Jean-Roch, pour votre aide, et, je vous souhaite un très bon week-end de ce Vendredi 3 Juillet 2026. Bien à vous, et bien aux Vmistes. Nicolas LEPAGE.
  • Qui est en ligne (en orange les membres du Cercle VM) - Afficher la liste

    • Aucun utilisateur enregistré actuellement en ligne
  • Statistiques des membres

    • Total des membres
      8498
    • Maximum en ligne
      9048

    Membre le plus récent
    Rémi CHASEZ
    Inscription
  • Statistiques des forums

    • Total des sujets
      85.1k
    • Total des messages
      683.2k
×
×
  • Créer...