Aller au contenu

Quels Eclairage pour Petite Scène


Recommended Posts

Notice de la télécommande

Set the multi-PAR lighting system to IR ACTIVE "ON" mode as described in the section "IR ACTIVE". Functions of the control buttons on the IR remote control:

Bl (Blackout)

If you press this button when the lighting system is in operation, then all lights and both power outlets Light 1

and Light 2 will switch off. When the BL button is pressed again, the lighting system will return to the previously

selected mode.

SP (Speed)

4-stage speed setting for programmes Pr1 - Pr4 and D1 - D4.

Stage 1 makes the colour change sequence run slowly. Pressing again activates Stage 2 with a faster colour

change sequence, followed by Stages 3 and 4, whereby Stage 4 equals the fastest succession of the colour

change sequence.

(Brightness)

4-stage brightness setting for all programmes and static colour mixing. The various stages of brightness can be

activated by pressing this button repeatedly.

Fl (Flash / stroboscope)

4-stage speed setting for the stroboscope effect. Stage 1 deactivates the stroboscope effect, Stage 2 represents

low, Stage 3 medium, and Stage 4 the fastest flash rate. The stroboscope effect can be combined with the RGBW

colour mixing mode and all colour change programmes. The power outlet sockets in the multi-PAR system

remain unaffected by the stroboscope effect.

R / g / B / W (Red, green, Blue, White)

These 4 buttons can be used to create individual colour mixtures. The 4 levels of brightness can be activated by

repeated pressing of the respective colour button, whereby at Level 1 the LEDs are switched off.

For example: If you set red and green to the respective highest level and blue and white to the lowest, i.e., off,

the result will be a bright yellow colour mixture.

Pr1 - Pr4

Colour change programmes with various colour patterns. The programme jumps from one colour to the next. The

speed at which the colour change can be set using the "SP" (Speed) button.

D1 - D4

Colour change programmes with various colour patterns. The programme crossfades from one colour to the next.

The speed at which the colour change can be set using the "SP" (Speed) button.

SA1 - SA4

Music controlled colour change programmes with various colour patterns. The microphone for control is in the

multi-PAR lighting system.

light 1 / light 2 - On / OFF

Using these buttons, the 2 power outlets in the multi-PAR lighting system can be switched on and off separately

by remote control.

Lien vers le commentaire
Partager sur d’autres sites

Apres étude la télécommande

tu peux commander le blackout

tu peux choisir la brillance 4 appui boutons

tu peux choisir la couleur

............par led RGBW

............4 positions la 1 éteinte 4 maxi

tu peux commander les 2 projos supplémentaire on/off

le reste pas très intéressant

Modifié par claudemage
Lien vers le commentaire
Partager sur d’autres sites

tu peux aussi si tu veux éviter les câbles DMX

un Emetteur/récepteur HF DMX

tu branche une tablette/PC en USB vers l'émetteur DMX

dans la tablette un programme Linux: OLA, QLC+

un récepteur DMX sur la barre

(portée 30m à 600m)

Programme QLC

7800.jpg.0e7961245c98fb423dd5b26338841d07.jpg

Modifié par claudemage
Lien vers le commentaire
Partager sur d’autres sites

  • 6 années plus tard...
Le 24/09/2013 à 16:29, claudemage a dit :

je ne sais pas ce que cela donne, mais je compte m'acheter le pack suivant qui tiens dans un sac

http://www.thomann.de/fr/stairville_stage_tri_led_bundle_complete.htm

 

7731.jpg.6349ec559ac3a2c251f5d40059236c48.jpg

Alors pour l'expérience j'ai pris ce bundle stairville.

J'ai 2 bundle . Mais récemment selon le contexte anniversaire  je n'ai utilisé qu'un set.

Et cela à suffit pour éclairer ma scène.

Top pour moi.

 

  • Merci 1
Lien vers le commentaire
Partager sur d’autres sites

  • 2 months plus tard...
  • Thomas changed the title to Quels Eclairage pour Petite Scène

Rejoins la conversation !

Tu peux publier maintenant et t'enregistrer plus tard. Si tu as un compte, connecte-toi maintenant pour publier avec ton identité.

Invité
Répondre à ce sujet…

×   Vous avez collé du contenu avec mise en forme.   Restaurer la mise en forme

  Only 75 emoji are allowed.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédemment saisis, a été restauré..   Effacer le contenu

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Créer...